Thai   English

 Call : 662-7381885, 668-2989-3157

Follow Us  


KXR series Heated Regenerative Desiccant Air Dryer

Heated Regenerative Desiccant Air Dryers (also known as Regenerative Desiccant Dryers) provide more consistent dew point than heatless desiccant dryers and lower dew points than refrigerated dryers. Instead of injecting processed purge air into the regeneration tower, heated dryers pre-heat the purge air before it is used for regeneration. In a heated desiccant dryer, typically 3-5% of process air is used for purge as opposed to the 15% or more used in heatless. Heating the regenerating purge air also extends the dryer cycle time to several hours, preventing dew point spikes.

KXR series heated regenerative desiccant air dryer uses an external electric heater to heat the dried compressed air that is for regeneration process, namely regeneration air. The heated air shows better moisture absorption effect when it meets alumina, and this process only requires 6% of dried compressed air, much less than that of heatless type. In addition, the pressure dew point at the outlet is -40C, and the flow capacity ranges from 0.7 m3/min to 510m3/min.

Operating Conditions

Normal Inlet Pressure 7 bar (g)
Normal Inlet Temperature 38 C
Pressure Dew Point -40 C
Max. Operating Pressure 10 bar
Min. Operating Pressure 4 bar
Max. Inlet Temperature 50 C
Min. Inlet Temperature 10 C
Standard Power Supply 380V/3Ph/50Hz

Related Names
Commercial Air Dryer Distributor | Refrigeration Dryer | Air Treatment Unit |Air Dryer |เครื่องทำลมแห้ง| ปั๊มลม| กรองลม| Dryer | Air Dryer Desiccant | Heatless Desiccant |Desiccant |สารดูดซับความชื้น| Activate Carbon | Heated Desiccant

Copyright © 2014 All rights reserved.

Web Design by